Introduction to Lexicon LXP5 MIDI Implementation Data documentation

One problem is that more than one term is used for the same
item. The event code descriptions in the Data Requests table
use one name, the following tables, describing the resulting 
data, another.

Data requests

n = MIDI channel

F0 06 05 3n 60 00 F7  Active setup data 

F0 06 05 3n 61 rr F7  One Register  (Stored (Single Program) Data)
                      rr = register number 

F0 06 05 3n 62 pp F7  Param data  (Parameter Adjust)
                      pp = parameter

F0 06 05 3n 64 00 F7  All registers (All User Setup Data)


Event requests

F0 06 05 6n 70 rr F7  Store current edit to register

F0 06 05 6n 71 rr F7  Recall program to edit buffer


Active Setup Data

F0 06 05 0n 5E dd dd .. .. dd ss F7  (5E is data byte count (94), ss = sumcheck.
                                      dd = data bytes, total length is 100 bytes)

Stored (Single Program) Data  (anwser to One Register request)

F0 06 05 1n rr 39 dd dd .. .. dd ss F7  (rr = register number,
                                         39 is data byte count (57), ss = sumcheck.
                                         dd = data bytes, total length is 64 bytes)


Parameter Adjust  (anwser to Param data)

F0 06 05 2n pp dd F7  (pp = parameter number, dd = parameter data)


All User Data  (anwser to all registers)

F0 06005 4n 39 00 dd dd .. .. dd ss F7  (39 00) is data byte count (7296),
                                         dd = data bytes, ss = sumcheck)